         
Click image for large view |
Click image for large view |
TenonCam is a complete manufacturing system that includes catalogs full of cabinets and accessories.
The images above show actual kitchens that were designed and
manufactured using the TenonCam system. It
requires virtually
no setup and is easy to use. The system includes
the TenonCam software and works with unique patented router
bits. If you want to increase production, lower manufacturing costs and improve the quality of your products, all at the same time, then TenonCam is for you.
All interacting surfaces of the joint are index cut, leaving any
variable in the thickness of material to harmlessly alter the interior
case dimension.
Unique design of the patented bits virtually
eliminates tear-out while working at minimal part spacing in the nest.
Mortise and Tenon construction provides maximum glue joint surface area. All machining is completed in the nest eliminating the need
for secondary operations (except for flipping some partitions).
Assembled product can be screwed, clamped or nailed.
All parts and joints are indexed by location and
sized for thickness as required to insure fast, easy, one-way-only fits
for reduced assembly time and fewer mistakes.
All cabinets in the TenonCam catalogs have built in
intelligence to enable the Mortise and Tenon style joinery - even when
they are stretched! That includes an assortment of most common corner
and appliance cabinets.
Look what TenonCam brings to your shop:
Turn-Key System for CNC Nested Based Cabinet
Manufacturing
Works with Frameless and Face Frame cabinet construction
Cabinet Body Mortise and Tenon Joints are machined in the nest with
specialized tooling (patent pending)
Construction boring for #6 x 1 5/8” assembly screws (switched on/off)
Backs are sized for thickness and set into Dado Joints
All joints handle material thickness variations automatically
Eliminates the need to measure and then enter thickness variations
into the material catalog
Tenon shoulders control the cabinet body interior opening sizes (Accuride
drawer guides install without shimming or shaving)
Bores only the required number of adjustable shelf holes
Guide boring for Blum Tandem, 230, 430 and MetaBox – Accuride 3832
Notches drawer box back for Blum Tandem guides
Boring for Concealed Hinge System Screws (switched on/off)
Drawer and roll-out tray bodies with Mortise and Tenon joints
Drawer and roll-out tray bottoms are sized for thickness and set
into Dado joints
Detached Mortise and Tenon Toe Boards with 45 and 22 1/2 degree miters Machined in the Nest. Toe Board height can be adjusted for finished floor thickness
Also available - Attached Toe Boards with Mortise and Tenon joints Machined in the Nest
Custom programming written specifically to control the
TenonCam routing operations
Operates in conjunction with Cabinet Vision and many other popular Software Packages
Reduces part identification, handling, cutting and machining time
over conventional methods, used to create the same joinery, by up to
80% (one man, one day, instead of five)
Mortise and Tenon joints locate the cabinet parts – hole borings
locate the hardware and construction screws – the TenonCam system
can reduce assembly time by as much as 50%
|
